| Site menu |
 |
|
|
 |
| Like Me on G+ |
|
|
|
|
| Section categories |
|
|
|
|
| Statistics |
|
Total online: 1 Guests: 1 Users: 0 |
|
| Login form |
|
|
|
|
| Advertise |
|
|
|
|
|
| Welcome, Guest · RSS |
2026-03-06, 3:32 AM |
Integrated Board
Key Features
1. Quad Intel® 64-bit Xeon® MP
Support 1066 MHz FSB
2. Intel® 7300 (Clarksboro) Chipset
3. Up to 192GB DDR2 ECC FB-DIMM
(Fully Buffered DIMM)
4. Intel® 82575EB Dual-port
Gigabit Ethernet Controller
5. 6x SATA (3 Gbps) Ports via ESB2
Controller
6. 1 (x8) PCI-e (using X16 slot),
1 (x8) PCI-e (using x8 slot) &
1 (x4) PCI-e (using x8 slot)
1x 64-bit 133MHz PCI-X
7. ATI ES1000 Graphics with
32MB video memory
8. IPMI 2.0 (SIMSO) Slot
|
|
|
|
|
|
| Links & Resources |
|
|
|
|
 |
|
|
|
|
|
|
 |
| MBD-X7QCE
-O |
- X7QCE
(Standard Retail Pack)
|
| MBD-X7QCE
-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16" x 14.3" (40.6cm x 36.3cm)
|
| |
|
|
| CPU |
- Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
- 6-Core Intel® Xeon®
Processor 7400
sequence - Quad-Core Intel® Xeon®
Processor 7300
sequence - Dual-Core Intel® Xeon®
Processor 7200 sequence
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory Capacity |
- Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® 7300 (Clarksboro) chipset
- ESB2
|
| SATA |
- Intel ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
|
|
|
|
| |
| 1U Chassis |
- CSE-818TQ-1000 (Supports CPUs running at 80W or less only)
|
| 2U Chassis |
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-Express |
- 1 (x8) PCI-e (using x16)slot
- 1 (x8) PCI-e (using x8) slot
- 1 (x4) PCI-e (using x8) slot
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slots
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- Super
 Doctor III - Watch Dog
- NMI
|
| Power Configurations |
- ACPI/ACPM Power Management
- Main Switch Override Mechansim
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
• Please see our OS Compatibility Chart |
|
|
|
|
|
|
| Category: My articles | Added by: yogi-iitk (2011-08-28)
|
| Views: 315
| Tags:
| Rating: 5.0/2 |
|
